Erratic Keyboard behavior in Parallels

PowerCADD & WildTools
Post Reply
rjmuller
Posts: 3
Joined: Mon Jun 01, 2020 5:13 pm

Erratic Keyboard behavior in Parallels

Post by rjmuller » Fri Jun 26, 2020 3:31 pm

Hi:

I'm running PC in a Mojave Parallels VM. Two things are happening:
The shift key will not constrain to horizontal or vertical (or the other designated angles). I switched to custom angle settings and it worked once and then stopped constraining.

Wild Tools, Option-Control Click-Drag will not create a Zoom Window, only the secondary menu comes up.

Any ideas?

Robert

iMac Pro, Catalina, Parallels 15.1.4, Mojave 10.14.6, PowerCADD 9.1.8 (RB15), WT 10.1.3 v5

Matt_A
Posts: 98
Joined: Wed May 29, 2019 9:45 pm

Re: Erratic Keyboard behavior in Parallels

Post by Matt_A » Fri Jun 26, 2020 4:16 pm

iMac Pro Mojave 10.14.6, PowerCADD 9.1.8 (RB15), WT 10.1.3 v5

User avatar
Alfred Scott
Posts: 84
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Re: Erratic Keyboard behavior in Parallels

Post by Alfred Scott » Sat Jun 27, 2020 9:36 pm

Possible operator error!

If it’s Zoomer you are after, try the command key instead of the control key.

Alfred

rjmuller
Posts: 3
Joined: Mon Jun 01, 2020 5:13 pm

Re: Erratic Keyboard behavior in Parallels

Post by rjmuller » Mon Jun 29, 2020 3:59 pm

:roll:

Thanks Alfred,

Sadly, I looked it up in the WildTools 9 Manual that I still have and promptly started using the ctrl instead of command.

Any thoughts on why shift is not working to draw a horizontal line?

Robert

Post Reply