Opening old files

PowerCADD & WildTools
jfindlay
Posts: 20
Joined: Fri Aug 30, 2019 7:17 pm

Opening old files

Post by jfindlay » Sat Jun 12, 2021 8:19 pm

Hi,

I’ve found a number of 3.25” discs that contain CAD files from 1996. I’m not sure if they’re Powrcadd or Powerdraw, but my version of PCad won’t recognize them.

Any ideas on how I might open these?

Thanks!

J Findlay

jfindlay
Posts: 20
Joined: Fri Aug 30, 2019 7:17 pm

Re: Opening old files

Post by jfindlay » Mon Jun 21, 2021 1:27 pm

Uh-oh.

Many views and no responses - that leads me to believe these files may be lost. That's unfortunate - they were for a large residential project we had done in the 90s, and it's recently been sold to purchasers who would like to renovate. Oh well - back to the "drawing board".

Best of luck to all with next steps in the CAD world. Not sure what direction we'll go, but I imagine we'll just try to make sure our Macs don't accidentally update in the near future.

User avatar
Alfred Scott
Posts: 272
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Re: Opening old files

Post by Alfred Scott » Mon Jun 21, 2021 1:46 pm

Maybe give me a call. I can put you in touch with a user in North Carolina who still has a G5 PowerMac and PowerCADD 6.

Alfred

rjpotter
Posts: 17
Joined: Thu May 30, 2019 9:16 am

Re: Opening old files

Post by rjpotter » Tue Jun 22, 2021 5:36 pm

Double clicking old files just opens them as a text file, but I have been able to open files from 1995 by dragging and dropping them onto the PC9 application in the Dock, and that seems to work fine.

User avatar
Alfred Scott
Posts: 272
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Re: Opening old files

Post by Alfred Scott » Tue Jun 22, 2021 5:45 pm

At some point, the ability to open some early files was eliminated in PC9 because it was not possible to compile PC9 with these. I have an old iMac here and I can probably open them on this. Important that you Zip the files before emailing them.

Alfred

jfindlay
Posts: 20
Joined: Fri Aug 30, 2019 7:17 pm

Re: Opening old files

Post by jfindlay » Wed Jun 23, 2021 9:23 pm

Hi Alfred,

Thank you very much for looking at these files for me. I've attached a zip file containing 8 files, one of which I replaced the extension with PC9 to see if that would make a difference. The others seem to have used the last 3 letter sent he file name for an extension.

Jamie Findlay
Attachments
Archive.zip
(355.85 KiB) Downloaded 430 times

User avatar
Alfred Scott
Posts: 272
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Re: Opening old files

Post by Alfred Scott » Wed Jun 23, 2021 10:17 pm

I’ll check them ASAP.

It would be very helpful to have your email and phone number.

Alfred
iPhone: 804-690-4591
alfred.scott@me.com

User avatar
Alfred Scott
Posts: 272
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Re: Opening old files

Post by Alfred Scott » Thu Jun 24, 2021 1:33 am

Jamie,

I didn’t get anywhere with these. I’m not sure if these are PowerDraw or PowerCADD files at all. I’ve never seen files that used names like these.

You might do a google search for file extensions of .PAO, .PAG, .FLR, .LRP, .SUR. These look like PC files to me.

Alfred

User avatar
Alfred Scott
Posts: 272
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Re: Opening old files

Post by Alfred Scott » Thu Jun 24, 2021 7:21 pm

Jamie,

Viewed in HexEdit these are clearly PowerDraw 4 files, but I can't help you if you will not communicate directly with me.

Alfred

User avatar
Alfred Scott
Posts: 272
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Re: Opening old files

Post by Alfred Scott » Thu Jun 24, 2021 7:53 pm

Does anyone remember the Type and Creator of PowerDraw 4 files?

Alfred

Post Reply