Can't activate Balloon Text Tool

PowerCADD & WildTools
Post Reply
johncruet48
Posts: 90
Joined: Wed Oct 23, 2019 2:49 pm

Can't activate Balloon Text Tool

Post by johncruet48 » Sun Nov 10, 2019 5:03 pm

I've sent a report to Technical Support.

It's a serious issue because I can't utilize this valuable tool for my reference points, my door and window schedule symbols, etc.

When I try to activate the tool, the entire program crashes!

What I currently run:
MacBook Pro 2019 15 inch
2.6 GHz Intel Core i7
16 GB 2400 Mhz DDR4 memory
Intel UHD Graphics 630 1536 MB
MacOS Mojave 10.14.6
Attachments
Screen Shot 2019-11-10 at 11.41.55 AM.jpg
Screen Shot 2019-11-10 at 11.41.55 AM.jpg (260.43 KiB) Viewed 10199 times

malcineurope
Posts: 15
Joined: Wed May 29, 2019 8:39 pm

Can't activate Balloon Text Tool

Post by malcineurope » Sun Nov 10, 2019 5:19 pm

This happens with me as well and has been a bug for some time. I am also on 10.14.6 but do not think it is related to Mojave.

User avatar
Alfred Scott
Posts: 272
Joined: Wed May 29, 2019 8:47 pm
Location: Richmond, VA
Contact:

Can't activate Balloon Text Tool

Post by Alfred Scott » Sun Nov 10, 2019 5:53 pm

As I recall, this is due to a corrupt font.

Use the Fontbook app to eliminate any bad fonts.

The Balloon Text tool uses the font selected by the PowerCADD Text tools.

Select one of these tools, and choose a font that you are sure is good.

Then you should be safe with the Balloon Text tool (or any similar text tools in WildTools.

Alfred

johncruet48
Posts: 90
Joined: Wed Oct 23, 2019 2:49 pm

Can't activate Balloon Text Tool

Post by johncruet48 » Mon Nov 11, 2019 6:16 pm

The solution I got from Tech Support- Todd Stanley- worked.

I resolved the crash by double-clicking on the tool, choosing a different font from the font menu, then choosing the desired font. When I option-clicked to open this tool, the tool opened.

Thank you Todd for your prompt response!

Post Reply